I am looking for a recommendation for a Hex Editor that I can use with my 24LC16B eeprom.
I have made a display project, where the PIC16F628 reads some values off sensors, makes the calculations and then reads some display data off the eeprom and then send it to a LCD and 6x Max7219 LED Displays...
To edit the ASCII contents of the EEPROM, I use UPA2.3 Lite version.I have tried others that I have found via google, but not really happy with any of them, some won't even display the ASCII equivalent.
UPA2.3 - It's OK, but not efficient. It can be a little tedious...Can anyone recommend or make any suggestions on how I can edit the ASCII data on the EEPROM efficiently?
I don't mind if it is dos or windows based.
Hex editor for EEPROM dump editing. Main purpose of this application is editing and analyzing small binary files, mostly eeprom dumps. You can open, save, compare, analyse, decode binary data. It can be used for operations not available in standard diagnostics such as serial eeprom editing, immobilizer code readout, odometer recalibration, airbag reset, etc. Professionals can use hex editor for direct memory access, but many functions are also automated, not requiring deep knowledge of.
- The following document has been written as a quick guide on how to begin EEPROM programming,
including reading EEPROMs, modifying EEPROM data, and writing back modified data to an EEPROM.
This guide also covers a number of EEPROM programmers available, ranging from the cheapest available through to a couple of highly recommended programmers.
Which EEPROM programmer should I buy.
This is probably the single most asked question, mainly due to the availability of literally thousands of EEPROM programmers available today.
The first question you should ask yourself before throwing down your hard earned coin, will I be using the EEPROM programmer again to program another device ?
If you are reading this guide, then you will obviously require an EEPROM programmer to read, modify, and write EEPROM data to either solve some problem (I.E. fit a device such as a radio, or cluster to your vehicle), or to begin learning what you can achieve by changing a devices parameters, to enable or disable different features.
If you are only going to use the EEPROM programmer once, or you are only EVER going to program one device, and you have no interest in using the EEPROM programmer for anything else, then it is recommended that you spend as little as possible, and buy a simple EEPROM programmer that supports the EEPROM chip you wish to program.
Many of the cheap EEPROM programmers are very good at programming a limited number and types of EEPROM chips, so spending large amounts of money on an expensive EEPROM programmer will not necessarily yield better results.
If you are in this for the long haul, and you are interested in reading EEPROMs from many different devices, then your best bet is to pay extra, and get a good EEPROM programmer that supports programming a comprehensive range of EEPROM chips.
Also keep in mind that you will also require clips and adaptors, depending on what device you wish to program, and the method used to program the EEPROM on the device.
Again, if you are only interested in programming a single device, then it is wise to only buy what you need.
Avr Eeprom Hex Editor
Online Hex Editor. Offset size type name value # start end size type data; 1: 0: 4: 5. So for most attacking the EEPROM will not be an option unless your ready to make an investment. EEPROM Some known content: The EEPROM in MMI only uses 8192 bytes of the chip, when opening the content with Hex-editor such as XVI32 it looks like this. VAG-PROG 2012 Vag-Prog is universal tool for modification of ECU configuration data on VW group vehicles. It can be used for operations not available in standard diagnostics such as serial eeprom editing, immobilizer code readout, odometer recalibration, airbag reset, etc. Professionals can use hex editor for direct memory access, but many functions are also automated, not requiring deep.